拖 and 回收喂 can be used in a variety of applications, but they are primarily designed to convey material to or from a piece of crushing equipment . These types of feeders can also be used to reclaim coal and other minerals from a stockpile using a dozer as well as to eliminate the hopper requirements for an application.
应用程序
跳转到:
拖 and 回收喂 feature engineered style chain with connecting flight bars designed to convey material along the deck. The feeders are powered by a drive system mounted on a head shaft. Either an electro-mechanical drive or a hydraulic drive system can be used to drive the conveyor. A low-profile design feed area allows 拖 and 回收喂 to be easily charged by dozers, FEL和卡车.
拖 and 回收喂 are well-suited for surface mining operations that need to move ROM or stockpiled free-flowing materials such as coal, 褐煤, 天然碱, 盐, 石油焦, 铝土矿, 铜和石膏.
Typically tied into the operation of a downstream conveyor, 拖 and 回收喂 do not require an operator, making them a safe and simple part of the material handling process.
菠菜网最稳定正规平台_最全菠菜网大全 拖 and 回收喂 are designed specifically for each application to provide a safe and simple means of conveying free-flowing material. Each 拖 Feeder and 回收式给料机 is supplied with an emergency stop to halt all motors, as well as fault detection to monitor momentary or self-resetting faults if encountered.
Optional safety design features on 菠菜网最稳定正规平台_最全菠菜网大全 拖 and 回收喂 include a dust suppression system that allows water to flow onto material to control the level of dust; an automatic or manual fire suppression system available in chemical or water deluge and wired to shut down the machine electrically in the event of a fire; access door safety locks to prevent the machine from starting or automatically shut down the machine when an access door is detected to be open; and automatic lubrication.
菠菜网最稳定正规平台_最全菠菜网大全 also offers an optional hand-held remote-control feature which transmits signals to a receiver mounted on the HPU to provide a convenient way to start and stop the equipment as well as vary the speed of the conveyor.
菠菜网最稳定正规平台_最全菠菜网大全 拖 Feeders and 回收喂 are tailored to meet each application. Depending on the application and machine width, chain sizes of 3.5”, 4.使用5”和6”间距. These feeders can handle large capacities and are able to handle up to 6,000 tph. 菠菜网最稳定正规平台_最全菠菜网大全 拖 Feeders and 回收喂 are typically used for handling +1/2” material and can be operated flat or on an incline.
拖 Feeder chains require a little bit of slack on the return side to operate most efficiently. 调整链条, first de-energize the feeder and follow all lockout/tagout/blockout procedures to ensure no energy can get to the machine while making the chain adjustment.
Position the hand pump on the tail side to extend and pump oil into the cylinder to relieve pressure off the shims. Insert shims to lock the cylinder in place. Position the hand pump to neutral and repeat for the cylinder on the other side of the feeder, ensuring to add the same number of shims to each side. lel from the head shaft through the tail shaft. (不知道这是什么意思)
Watch this video for step-by-step instructions on 如何 adjust chain tension on a 拖 Feeder.
Typically tied into the operation of a downstream conveyor, 拖 and 回收喂 do not require an operator, making them a safe and simple part of the material handling process.
